Heat Pumps Today

Info www.vitalenergi.co.uk CMYK / .ai CMYK / .ai CMYK / .ai www.acrjournal.uk/heat-pumps 25 T R A I N I N G Are there any other renewable technologies that work well alongside heat pumps? Yes, heat pumps are a key part of a wider technology mix, that when combined together can provide a low carbon solution. This might be solar thermal panels that are adding heat into the ground to recharge the thermal energy taken out by the heat pump, or a biofuel CHP engine that’s used to feed electricity to the heat pump. What factors have to be observed if considering a heat pump? Consider where you’re going to source energy for the heat pump, do you have a river nearby or can you drill deep into the ground on your site? Maybe you have lots of outdoor space for an air source solution. Then think about your local electrical infrastructure, depending on how large your heat pump installation is, this could be a significant factor to consider. When it comes to water source heat pumps, there is also the potential to drill down and utilise aquifers, which are bodies of water that lie under the surface. Tell us about some of the heat pump projects you’ve worked on… We are currently developing and delivering seven heat pump projects, with the most recent completion being the UK’s largest district heating connected water source heat pump project at Queens Quay, Clydebank, where we installed two 2.65MW heat pumps to extract energy from the River Clyde, providing heat and hot water to surrounding homes and businesses. We’re also really proud of our recent work with Southwark Council to provide a more e cient low carbon heat supply using water source heat pumps to supply and decarbonise over 2,000 properties, using ground water abstracted from and reinjected into locally drilled boreholes. Can you explain the di erence between an open and closed loop system? Let’s take a couple of examples to explain. An open loop system is where we are directly extracting energy from the source, such as taking water from a river. We pump water from the river, extract energy back at the heat pump and we pump this water back into the river, so because we are interacting directly with the river water, this is an open loop system. For a closed loop system, let’s take pipework installed in boreholes deep into the ground as our example. Within this pipework, we have a fluid that is transferring energy from the ground, which we then pump back to the heat pump, extract this energy and pump it back into the ground around this closed loop. So unlike in our first open loop example where we directly pumped the river water, here we are transferring energy from the ground via a heat transfer fluid inside a close pipework circuit. What type of businesses can benefit from heat pump technology? Anyone looking to decarbonise energy production can benefit, whether you have an existing installation and are looking to come away from gas, for example. Or you have waste heat or waste electricity which could be used alongside a heat pump installation. Of course, each case has to be looked into to determine the feasibility of applying this technology. What size network can a heat pump power? Heat pumps come in a huge variety of sizes, from one heat pump in your back garden serving that single dwelling, all the way up to large centralised district heating production serving thousands of end users connected to a heat network. How easy is it to retrofit heat pumps into an existing network? It comes with its challenges of course. First, we have to determine the appropriate source of energy for the retrofit heat pump, is this water, ground or air source? Then we have to consider how hard are we asking the heat pump to work, what I mean is, the temperature we are asking the heat pump to produce. Older systems often operate at higher temperatures, which heat pumps can achieve - the trade-o is a reduction in e ciency, so it’s about finding a balance between modifications to the existing network to lower temperatures and the heat pump selection. So, it depends on a project-by-project bases how easy it is, but it’s certainly possible. Why are heat pumps becoming more popular? Changes in planning policy and the decarbonisation of the electrical grid are major factors. With the electrical grid becoming less carbon intensive, people are turning to electricity as a source of fuel - remember heat pumps require an electrical supply. How are heat pumps renewable if they rely on electricity for power? Good question! We’ve talked about how heat pumps can use energy from water, the ground, or air, but quite rightly, they need an electrical supply. In some cases, it could be that this electrical supply is coming directly from a renewable source itself, such a PV panels. However, for the majority of installations this electrical supply will come from the grid, so we have to consider how clean is this electricity supplying the heat pump. Some may argue that the grid isn’t quite as low carbon as future planning policy is indicating, but generally speaking, we can see that the grid is on a path of decarbonisation, so the electricity we power the heat pumps with is coming from a greener source each day. Combine this with the e ciency a heat pump can operate at and you start to see why a heat pump is a low carbon technology. With over 30 years’ industry experience, Vital Energi specialise in the design and installation of the latest renewable and low carbon energy generation, distribution and consumption technologies. If you have an energy project in mind, or would like more information about how we can help decarbonise your business, please contact us today.